7/8 in Corner Rod with 90 degree return and Standard Horizontal Mounts
French Return Corner Rod
French Return Corner Rod
Corner Rod 7/8″ Diameter
French Return Corner Rod in Antique Black
7/8 in Corner Rod with 90 degree return and Standard Horizontal Mounts
French Return Corner Rod
French Return Corner Rod
Corner Rod 7/8″ Diameter
French Return Corner Rod in Antique Black
Full Screen

Corner Iron Curtain Rod

Design the perfect iron curtain rod from hundreds of possible combinations below and click add to cart. Choose your favorite finish, mount, finial or 90 degree return to finish off your custom curtain rod.

7/8" rods over 72" and 1-1/4" rods over 94" long will require center support mounts.  Bypass mounts and C-Rings are required if you need the curtain to draw past the support mounts. If you require a bypass mount, please let us know in the "Special Instructions" box.

90 degree radius bends are exclusive to our 7/8" rods. Corner Curtain rods made of 1 1/4" diameter rod with have a mitered (sharp) corner.

For inside mounted rods, measure the opening and provide that measurement without any subtractions. We will subtract for the mounts after the order is received.

To order a French Return on one side only, use the "Special Instructions" box to tell us which side needs an end mount or finial and which side needs a 90-degree return.

Please see the measurement guides for more information.

Select Mount
Select Finial
Category:

Details & Dimensions

Choose the 7/8″ diameter or the 1-1/4″ for your corner rods. The 7/8″ rod comes with a 90 degree radius corner and the 1 1/4″ rod comes with a 90 degree mitered corner.

Rods that are extensive in length will ship in two or more pieces depending on the size. Rest assured, we can easily guarantee that any of our joined curtain rods will be as strong and functional as a one-piece curtain rod. When our rods are split for shipping, they and joined together internally with a center connector so there is never a bump for your curtains to hang up on. Mounting brackets will be placed where the rods join together.

Bypass Mounts and C-Curtain Rings are recommended for all rods with corner bends to allow your draperies to stack neatly into the corners of the window.

How to measure windows for Corner Drapery Rods:

Put the end of the tape measure into the corner of the room and measure past the window to the point where you want the rod to end and the finial to begin. Be sure to add enough on the side so that the drapes will block the light around the side of the window, and allow the drape to slide sufficiently off of the window when they are opened. Now do the same thing in the other direction for the other window. These measurements are the measurements we want. Do not subtract or add anything, we will do the math for the projection of the rod.

Make sure you have room beyond these measurements for the drapery rod finials you have selected.

For Corner curtain Rod with a French Return Leave enough room on the outside end of the return for your curtains to wrap around the rod, a 3″ minimum clearance is recommended.

For inside mounted rods (mounted to the wall perpendicular the window wall), measure the opening and provide that measurement without any deductions, in the “Special Instructions” box, we will subtract for the thickness of the mounts after the order is received.

Order changes on custom curtain rods can be made within 24 hours of placing the order. Since all curtain rods are custom cut to your measurements, we can not make changes after the 24 hours.

 

Shipping Information

We  stock every item shown on the web site, and ship most curtain rod orders within 3-4 weeks via UPS ground. Custom made parts and custom plate cutting like t-straps and hinges may take a few weeks.

The maximum length we can ship curtain rods in one piece is 94″ however, we will generally split curtain rods at the mounting points if over 73″. We have developed a system that is invisible, strong, easy to assemble, and will allow you to build a high-quality curtain rod without concern of sagging or poor performance.

Patina Finishes

All hardware selected with you curtain rod will be treated with the same patina finish, this includes the rod, mounts, finials, curtain rings and supplied hardware. Antique Black Our antique black finish is a very deep flat black reminiscent of the hand applied carbon and wax finishes used by yesterday’s blacksmiths.

Iron Oxide Our hand applied iron oxide patina finish is the most versatile finish we produce. It is the correct choice for rustic and Tuscan decor and blends perfectly with your oil rubbed bronze, rusty brown, or black iron decor.

Aged Silver Our hand applied burnished silver patina finish has rich nickel silver highlights with antique black iron undertones and blends well with stainless or nickel accessories and decor.

Antique Gold Our hand applied antique gold patina finish has rich deep gold highlights with antique black iron undertones reminiscent of Spanish and Italian treasure.

You may also like…

image

Hand-forged custom wrought iron drapery rods

Finely finished, personalized and custom curtain rods and hand forged iron hardware crafted from our Paso Robles, California design studio and blacksmith shop.

At Paso Robles Ironworks we’ve created elegant iron curtain rods and drapery hardware, hand forged door and cabinet hardware, and exquisite iron bathroom fixtures. These details throughout your space infuse their magic, forged by fire, in ways you never knew were so significant until now. Founded by a blacksmith in 1985 who knows Paso as a city of cowboys long before it was revered for its vineyards and olive groves. California design with European inspired details, these finely finished wrought iron accessories add character to homes and hotels across the U.S.

Reviews