Frequently Asked Installation Questions

How do I connect my rod to the bypass mount?

After connecting both sections of rod together with the center connector insert, place the bypass mount next to the seam opposite of the screw head. With the supplied self tapping screw, drill the screw through the hole in the mount, the rod and center connecter.

How the screws and caps fit together?

Bath hardware and old world mounts will include a screw, black washer, silver washer, and plastic cap to give the look of a rivet. First, drop the silver washer on the screw to cup over the screwhead. Second, twist on the black washer (will sit between the mounting service and cap). Drill the screw into the wall and finish by snapping the plastic cap onto the silver washer.